|
SS-0010
Stainless Deck Hinge
|
|
Polished stainless steel heavy duty hinges. 5" long X 5 1/2" wide. Accepts 1/4" countersunk bolts. Sold individually.
|
|
|
|
|
|
SS-0025
Stainless Take-Apart Hinge - Left
|
|
Take-Apart hinges feature a center hinge point that will slide apart for easy hatch removal. Constructed from polished 316 stainless steel. 3 1/2" long X 2" wide.
|
|
|
|
|
|
|
HG-0010
Long Arm Hatch Hinges (pr)
|
|
Billet aluminum long arm hinges are CNC machined from billet aluminum and are available in polished, powdercoated, and anodized finishes. 3 5/8" long X 2 7/8" wide. Sold in pairs.
|
|
|
|
|
|
HG-0015
Hidden Hinges Single Arm (ea)
|
|
Billet aluminum hidden hinges are designed to mount under the engine hatch. Available in polished, powdercoated, and anodized finishes. Includes a back up plate for the engine hatch. Sold individually.
|
|
|
|
|
HG-0020
Hidden Hinges Dual Arm (ea)
|
|
Billet aluminum hidden hinges are designed to mount under the engine hatch. Includes a back up plate for the engine hatch. Available in polished, powdercoated, and anodized finishes. Sold individually.
|
|
|
|
|
HG-0016
Hidden Hinge Cover Plate
|
|
This billet cover plate is designed to cover up gunnel cut outs where a hidden hinge was previously used. Sold individually.
|
|
|
|
|
HG-0030
Heavy Duty Hatch Hinge (ea)
|
|
Heavy duty billet aluminum hatch hinge. 5" long X 5 1/2" wide. This hinge features a low profile design with a 1/4" stainless steel hinge pin. The hinge components are assembled with precision teflon washers to insure a smooth operation. The hinge sections accept (4) 1/4" flat head mounting fasteners per side. Available in polished, anodized, and powdercoated finishes. Sold individually.
|
|
|
|
|
HG-0045
Bullet Style Hinge (ea)
|
|
Billet aluminum bullet style hinges. Heavy duty aluminum construction, 9" long X 1 1/4" wide. This hinge features a 5/16" stailess steel pivot pin with precision teflon washers to insure a smooth operation. Blind hole mounting locations that are drilled and tapped to accept (5) 5/16"-18 bolts. Available in polished, powdercaoted, and anodized finishes. Sold individually.
|
|
|
|
|
HS-0010
Hatch Support Angle
|
|
If your engine hatch is sagging and needs additional structural support, our support angles will add strength and cosmetic value to your engine compartment. Machined from billet aluminum, they measure 1 1/2" x 1 1/2" x 3". They are available in polished, powdercoated and anodized finishes.Sold individually.
|
|
|
|
|
HS-0015
Hatch Support Angle w/ Teflon (set)
|
|
If your engine hatch is sagging and needs additional structural support, our support angles will add strength and cosmetic value to your engine compartment. Machined from billet aluminum, they measure 1 1/2" x 2" x 3". This set includes (1) hatch angle with no teflon and (1) hatch angle with teflon. They are available in polished, powder coated and anodized finishes. Sold in sets.
|
|
|
|
|
HH-001
Replacement Hinge Pin
|
|
Replacement stainless steel pins for HG-0010 hinges. 1/4" diameter with a 1" grip length. Split rings sold separately.
|
|
|
|
|
|
HG-0025
Billet Deck Plates For Hidden Hinges (Set)
|
|
These billet aluminum mount plates are designed to mount on top of the engine hatch. They are studded to accept DMP hidden hinges on the underside of the engine hatch. Available in polished, powdercoated, and anodized finishes. Sold in pairs.
|
|
|
|
|
HG-0012
Scissor Hinge Short Arm With Gas Shock (PR)
|
|
Billet aluminum scissor hinges with gas shocks are available in polished, powdercoated, and anodized finishes. Includes 35 lb rated gas shocks. Heavier gas shocks can be substituted, up to 80 lbs. Sold in pairs.
|
|
|
|
|
HG-0035
Scissor Hinge Long Arm With Gas Shock (PR)
|
|
Billet aluminum scissor hinges with gas shocks are available in polished, powdercoated, and anodized finishes. Includes 35 lb rated gas shocks. Heavier gas shocks can be substituted, up to 80 lbs. Sold in pairs.
|
|
|
|
|
HG-0014
Scissor Hinge Dual With Gas Shocks
|
|
Billet aluminum scissor hinge assemblies with gas shocks are available in polished, powdercoated, and anodized finishes. Includes 35 lb rated gas shocks. Heavier gas shocks could be substituted, up to 80 lbs.
|
|
|
|
|
|
|
|
|
|
HG-0040
Scissor Hinge X-Large Arm (PR)
|
|
Billet aluminum hidden scissor hinges are assembled with precision teflon washers and heavy duty stainless steel shoulder bolts. Includes studded stainless steel backup plates for the engine hatch. Available in polished, powdercoated, and anodized finishes. Sold in pairs.
|
|
|
|
|
PH-0010
Dana Power Hinges - Side Gunnel Mount
|
|
Marine Industries West Power Hinges are the most advanced hatch lifting system on the market. These newly designed hinges are constructed out of 6061-T6 billet aluminum and mount on the rear side of each gunnel. Standard lifting capacity is 125 lbs with the plastic lines. With the optional complete stainless steel line kit and pump upgrade the lifting capacity increases to 160 lbs. These hinges are available in polished, powdercoated and anodized finishes. The Power Hinge kit consist of (2) Power Hinges, (1) hydraulic pump, (2) mounting brackets, (1) bypass valve, a plastic line set, and all necessary brass fittings. See the product video in our videos section.
|
|
|
|
|
